Changing The Gid By Specifying The Id (Group Id Entry) (Nxdn Trunking System Only) - Kenwood NEXEDGE NX-200 Function Reference
Hide thumbs
Also See for NEXEDGE NX-200:
- Service manual (172 pages) ,
- Instruction manual (136 pages) ,
- Brochure (12 pages)
Table of Contents
Advertisement
3 BASIC OPERATIONS
3.5 Changing the Zone-channel or GID
Note
• Refer to
Key Operations for Each Mode on page 531
• The channel or GID number selected before the transceiver enters Channel Entry Mode appears on the upper right side of the LCD,
such as "[ 001]". Pressing the Menu ([ ]), Back, [#] or [*] key while no channel or GID number is entered causes the transceiver to
abort Channel Entry Mode and then restore to this channel or GID number.
• If Channel Entry Mode aborts by pressing the Right/Home key, the transceiver restores to the same channel or GID selected before
the transceiver entered Channel Entry Mode.
• Pressing the PTT switch while in Channel Entry Mode causes the transceiver to transmit on the channel or GID selected before the
transceiver enters Channel Entry Mode.
• If no key is pressed before the amount of time configured for Mode Reset Timer elapses while the transceiver is in Channel Entry
Mode, the transceiver will exit Channel Entry Mode and return to the channel or GID selected before the transceiver entered Channel
Entry Mode.
• This function is unavailable for NX-200S/ NX-300S.
Configuration using KPG-111D/ DN
Assigning functions to the PF keys on the transceiver (
Changing the GID by Specifying the ID (Group ID Entry)
(NXDN Trunking System Only)
The Group ID Entry can be used to migrate the GID configured for the Group ID by directly selecting the Group ID which a
user wishes to use in an NXDN Trunking system.
The Group ID which a user wishes to use can be specified by directly entering a Group ID after pressing the Group ID/
Channel Entry key when a zone other than an NXDN Trunking system is selected.
Also, if the "Group ID/Channel Entry" is configured for the Keypad Operation, the Group ID can be specified by pressing
the [0] to [9] keys on the keypad while a zone in an NXDN Trunking system is selected.
The Group ID can be migrate to the configured GID by specifying a Group ID configured to a zone in an NXDN Trunking
system.
The transceiver automatically recognizes the digits of the highest Group ID in all the zones in an NXDN Trunking system
configured for the transceiver.
Operating the Transceiver
1
Press the
Group ID/Channel Entry
The transceiver enters Group ID Entry Mode.
The following operations are identical even if the transceiver
enters Group ID Mode by a user pressing the keypad.
FUNC (K)/Ver 4.00
for key operations for entering the channel number in Channel Entry Mode.
See
FPRG 8.12 Key Assignment Window)
key while an NXDN Trunking system zone is selected.
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
CONTENTS
INDEX
30
Advertisement
Chapters
Table of Contents
