Table of Contents
Advertisement
Recording Images on FTP Server (Cont.)
IFTP by External Alarm/Motion Detection
You can control the settings to record images for FTP by External Alarm/Motion
Detection.
To configure the external alarm/motion detection, select "ON" in "External Alarm
G
Detect" or "Motion Detect" in the alarm settings (➝ page. 64)
To run the recording, select "Extern Alarm Detection" or "Motion Detection" in
G
"Connection to FTP Enable" (➝ page. 43).
1) Configure the numbers of frames you want to record for
Pre-Recording
Possible numbers of frames are as follows:
G
Enter a number in the range of 0 through 30.
2) Configure the numbers of frames you want to record for
Post-Recording
Enter the number between 0 and 1000.
G
NOTE
• Numbers of recorded image frame may decrease depending on networking
conditions and recording cycle
3) Configure Interval(s)
Records 1 image per configured recording cycle (second).
G
Setting ranges are 1 through 10.
NOTE
• Cycle may change depending on Resolution (image size) and networking
conditions.
46
.
Hide quick links:
Advertisement
Chapters
Table of Contents
