HP Jet Fusion 340 Product Documentation Site Preparation Manual page 37

Hide thumbs Also See for Jet Fusion 340:

Table of Contents

Server installation

Download the latest version of HP SmartStream 3D Command Center Server from

SmartStream3DCommandCenter/software.

Ensure that this computer will run 24/7 by disabling all policies that could lead the computer to switch to

sleep or standby mode.

Install the HP SmartStream 3D Command Center Server into the computer you have selected to be the

server of the system, meeting the requirements explained in

on page

Once you have finished installing, use the icon on the system taskbar to check that the Command Center

Server is running.

The Command Center Server has no user interface, although it displays a system tray icon, near the

Windows taskbar. Bear in mind that the Running message may take a while to appear and you can see Not

responding for a few seconds.

If the Not responding message remains for a while, check that the firewall configuration on your computer

allows connection to one of the ports within the range 8080–8090. If it keeps failing, read the

troubleshooting guide and contact your service representative.

It is important to take note of the port displayed, since it will be used for all the Client connections.

Client installation

Download the latest version of HP SmartStream 3D Command Center Client from

SmartStream3DCommandCenter/software.

After installation, you will want to install the Command Center Client in all the computers that you want to

display the status of your devices. It is also useful to install it on the server computer, so that you can check

network issues easily. For this test, we need to install it in only one computer.

Open the Command Center Client and click the

connectivity.

ENWW

31. Restart when required.

Command Center Server computer

icon in the top right corner, then click Network

Test your connection to HP Cloud

www.hp.com/go/

Table of Contents

Jet fusion 540 Jet fusion 580