Table of Contents
Advertisement
en-gb | 50 | JLR-100-069
10. While an assistant holds the top frame (48),
loosen the M12 nuts and threaded bolts (55) on
the bracket (56). Set the threaded bolts (55)
aside. Dispose of the M12 nuts.
The bracket is located on the top frame, on the
opposite side of the table as the handle.
Figure 66: Scissors Lift Table without Platforms from
above
48
Top Frame
55
SP04004452 Threaded Bolts with M12 Self-Locking
Nuts (2 pieces each)
56
Bracket
11. While an assistant continues to hold the top
frame (48), place a board between the top frame
(48) and the spindle support (58) to prevent the
top frame (48) from tipping.
Figure 67: Scissors Lift Table without Platforms from
below
27
Spindles (2 pieces)
48
Top Frame
56
Bracket
57
Key Holes (1 per spindle)
58
Spindle Support
12. Push the top frame (48) towards the spindles
(27) until the spindles (27) are in their respective
key holes (57). With the help of an assistant, lift
the top frame (48) from the scissors lift table and
place it in a safe location sideways.
SP04006297 | 06/2021
CAUTION
Danger of Falling Loads!
The top frame weighs approximately 35 kg and
should be carried by more than one person.
Lift and move the top frame only with the help
of an assistant.
13. Screw the spindles (27) out of the spindle
support (58). Dispose of the spindles (27).
14. Clean the threads in the spindle support (58).
Grease the threads.
Use only 22320 Divinol Lithogrease 000.
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany
- Quick Links:
- General Information
Hide quick links:
Advertisement
Table of Contents
