Field Data Of Iso Transponders (Mds E) - Siemens SIMATIC Ident RF340R02 System Manual

Table of Contents

Advertisement

MDS D426
MDS D428
MDS D460
MDS D524
MDS D525
MDS D526
MDS D528
All values are in mm
Keep in mind that the minimum distance must be increased by 10 mm with ambient temperatures
1)
of 40 °C and higher.
Keep in mind that the minimum distance of the reader to the transponder must be increased by
2)
7 mm (1st generation) or 6 mm (2nd generation) for every 5 °C rise in temperature with ambient
temperatures of 25 °C and higher. The minimum distance must be increased by 15 mm with ambi-
ent temperatures of 50 °C and higher (1st and 2nd generation).
Keep in mind that the minimum distance of the reader to the transponder must be increased by
3)
5 mm (1st generation) or 3 mm (2nd generation) for every 5 °C rise in temperature with ambient
temperatures of 25 °C and higher. The minimum distance must be increased by 9 mm (1st genera-
tion) or 14 mm (2nd generation) with ambient temperatures of 50 °C and higher.
Table 4- 18
MDS D124
MDS D160
MDS D324
MDS D424
MDS D460
All values are in mm
4.2.3

Field data of ISO transponders (MDS E)

The limit distances (S
transmission window for each reader-transponder combination are listed in the tables below.
Observe the following information for field data of ISO transponders:
● A maximum median deviation of ±2 mm is possible in static mode (without affecting the
field data).
● In dynamic mode, make sure that rectangular transponders cross the antenna field in the
longitudinal direction.
SIMATIC RF300
System Manual, 07/2017, C79000-G8976-C345-07
Length of the transmission window
in the x direction (L
) in the y direction (L
x
220
80
80
100
80
220
80
Field data RF382R reader
Length of the transmission window
in the x direction (L
)
in the y direction
x
70
50
60
65
40
) and operating distances (S
g
4.2 Field data for transponders, readers and antennas
Operating distance
(S
)
y
160
0...155
50
2...70
70
2...65
70
2...120
45
2...35
160
0...155
50
2...70
Operating distance
(S
(Ly)
130
40...65
100
35...50
120
40...65
120
40...65
80
30...50
) along with the length of the
a
Planning the RF300 system
Limit distance (S
)
a
195
95
90
140
50
195
95
Limit distance (S
)
a
75
65
75
75
60
)
g
)
g
61

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simatic ident rf300Simatic ident rf310r02

Table of Contents