Installing The Camera - Motorola L6Q Installation Manual
Hide thumbs
Also See for L6Q:
- Installation manual (257 pages) ,
- User manual (193 pages) ,
- Get started manual (36 pages)
Table of Contents
Advertisement
When pairing mode is active the LED Status Indicator will blink, alternating between amber
and green.
c Tap Continue
5 Wait for re-pairing to successfully complete.
6 Choose one of the following actions:
•
If re-pairing is successful, tap Continue
•
If re-pairing is unsuccessful, tap Try Again and repeat the re-pairing process.
3.5.3
Installing the Camera
Prerequisites: Any external power options are installed.
The Camera Mounting Bracket is installed.
The camera is paired to the Mobile Companion application.
The internal camera batteries are fully charged.
Obtain:
•
Long Range Antenna and Angle Adapter
•
Mobile Phone Pouch
Procedure:
1 Connect the Long Range Antenna to the upper connector on the back of the camera.
If desired, use the angle adapter so that the antenna can be positioned parallel with the axis of
the camera.
2 Select from one of the following options:
If...
If the Internal Battery
Only power option is be-
ing used,
If the camera is using
an external power op-
tion,
3 Insert the ball on the back of the camera into the ball socket on the mounting bracket.
Tighten the ball joint enough to keep the camera in place, but still allow it to pivot.
4 Remove the protective film from the camera lens.
5 Attach the Mobile Phone Pouch.
a Insert the mobile phone into the Mobile Phone Pouch.
b Hook the pouch on the lower Metal Band Strap.
c Ensure that the phone and pouch are secure.
Then...
go to
step Step
3.
connect the elbow power connector to the camera:
a Align the elbow connector with the lower port on the back of
the camera by rotating until the connector drops in.
NOTE: The elbow power connector is keyed so
that it can only connect when rotated into the cor-
rect position.
b Tighten down the locking sleeve.
MN010089A01-AB
Chapter 3 : Hardware Installation
55
Advertisement
Table of Contents
