3.5
Camera Installation
The camera can be mounted to a pole with the Metal Band Straps, or to a surface with the Lag Bolts.
Before installation, the internal camera batteries must be fully charged.
Figure 15: Camera Mounting
3.5.1
Installing the Camera Mounting Bracket
Prerequisites: If mounting on a pole, obtain:
•
Camera Mounting Bracket
•
Metal Band Straps (2x)
•
Hex Key Tool
•
Wire Snips
•
Zip-Tie (1x)
If mounting on a flat surface, obtain:
•
Camera Mounting Bracket
•
Lag Bolts (2x)
•
Power Drill
Procedure:
1 Choose one of the following options:
If...
If the camera is be-
ing mounted to a
pole,
Then...
go to
step Step 2
MN010089A01-AB
Chapter 3 : Hardware Installation
53