FusionCol8000-C210 In-room Chilled Water Smart
Cooling Product
User Manual (2022, Netherland GS)
For safe system operation, when smart cooling product components are turned on,
the following coupling relationships are presented:
● When the electric heater is turned on, the indoor fans will turn on
automatically.
● When the electrode humidifier is turned on, the indoor fans and inlet water
solenoid valve will start automatically.
● When the input value of the indoor fan is less than the minimum speed, the
indoor fan will run at the minimum speed.
Step 3 Check that the indoor fans run properly, and no alarm generates.
Step 4 Choose Maint > Diagnostic Mode > Exit or tap
----End
11.1.14 How Do I Handle an E-Label Identification Problem?
Context
If strong electric interference exists in the environment or the smart cooling
product backplane is abnormal, the electronic label may fail to be identified.
●
●
Issue 01 (2022-12-30)
NO TICE
If the information shown in
the smart cooling product can run properly. To clear this message, go to
1.
Figure 11-9 Message 1
If the information shown in
the smart cooling product cannot run properly. Go to
steps.
Copyright © Huawei Digital Power Technologies Co., Ltd.
Figure 11-9
is displayed on the controller screen,
Figure 11-10
is displayed on the controller screen,
to exit the diagnostic mode.
Step 2
and subsequent
11 FAQ
Step
144