Table of Contents
Advertisement
50
en | Configuration
–
–
–
Date and time (CCSD‑CURD only)
Click the Date and time button to open the date and time settings page.
Click the Change date and time settings button to select:
–
–
2020.05 | V2.2 |
–
Seat name: Click in the Seat name dialog box and enter/change the seat name as
required.
–
Mode: The settings in the Mode column can be used to change the function of
individual seats/Discussion Devices. A Discussion Device can be configured as an
'interruption microphone' that can always get the floor regardless of the number of
open microphones. The 'interruption microphone' has the same rights as the
chairperson except for priority. The participant using the 'interruption microphone' is
not added to the request list. Typically an interruption microphone is positioned at a
podium for use by guest speakers. A total of 25 Discussion Devices can be
configured as a chairperson's device or interruption microphone. For example, 22
chairperson's devices + 3 interruption microphones = 25 devices in total.
Normal: The Discussion Device operates as a participant device.
Button: The Discussion Device operates as an interruption microphone. The speaker
has to push and release the button to enable the microphone and push and release
the button again to disable the microphone.
PTT (Push-to-talk): The Discussion Device operates as an interruption microphone.
The microphone is enabled for as long as the speaker pushes and holds in the
microphone request button.
Note: To use the interruption microphone setting, the slide switch at the base of the
discussion device must be set to participant. Refer to Configure Discussion Device,
page 36 .
–
Camera: The camera name connected to the seat.
–
Pre-position: Camera preposition setting number assigned to the seat.
Selection mode (select on Discussion Devices): When selected, a Discussion Device can
be located by selecting the seat in the list or by pushing the Discussion Device
microphone request button. The Discussion Device LEDs are illuminated.
–
When the 'selection mode' is active, the Discussion Devices cannot be used for
discussion. They can, however, still be selected/located.
De-init button: When clicked, it erases the address/subscription of the selected
Discussion Device:
–
The light-ring in the head of the microphone is lit red.
–
The LED indicator above the microphone button is lit amber.
Initialize the Discussion Device as described in Initialize Discussion Device, page 36 .
Remove disconnected seats button: Removes the subscribed seats from the seats
overview.
Time: Select the local time.
Date: Select the current date.
Operation manual
Digital Discussion System
Bosch Security B.V.
Hide quick links:
Advertisement
Table of Contents
