Table of Contents
Advertisement
Digital Discussion System
Audio
Click the Audio button to open the audio settings page:
–
–
–
–
–
–
–
–
Cameras
A total of 6 cameras can be connected to the CCS 1000 D Digital Discussion System.
Click the Cameras button to open the camera settings page.
–
–
Bosch Security B.V.
–
Prepare system: This right gives access to the power page.
System:
–
Master: Master volume to control the loudspeakers of the discussion devices and the
PA (audio output 1).
–
LSP: Individual volume control for the loudspeakers of the discussion devices.
–
PA: Individual volume control for the PA (audio output 1).
Line input/output: Sets the sensitivity of the analogue audio input and audio output
levels 1 and 2 of the Control Unit.
XLR Microphone: Defines the mode of audio input 1 of the Control Unit:
–
When selected, it enables input 1 (XLR) for microphone signal level.
–
When not selected, it enables input 1 (RCA socket) for audio line input level.
Routing options I/O 2: Defines the audio routing mode of input 2 and output 2 of the
Control Unit:
–
Recorder: Use the recorder mode to connect an external recorder via audio input 2
and output 2.
–
Floor: In floor mode, audio input 2 and output 2 are used, and the level is controlled
independently.
–
Mix-minus: Use the Mix‑minus mode to connect two systems via audio input 2 and
audio output 2.
–
Insertion: In the Insertion mode, audio output 2 and audio input 2 are both used to
add signals from external audio devices. For example, connection of an external
audio mixer between audio output 2 and audio input 2.
Line output: Sets the sensitivity of the analogue audio input and audio output levels 3, 4,
5, or 6 of the Control Unit.
Individual microphone output (CCSD‑CURD only): Select the routing of the analogue
audio outputs 3, 4, 5 or 6 of the Control Unit:
–
Select 3, 4, 5 or 6 to enable selectable microphones for individual recording.
Digital Acoustic Feedback Suppression (DAFS): Settings for the DAFS function:
–
Off: Sets the DAFS function to off.
–
Natural: Sets the DAFS function to on.
–
Maximum: Sets the system volume to a maximum with minimal risk of acoustic
feedback (howling) occurring.
Note: Audio artifacts might occur at higher volume levels.
Feedback prevention:
–
Loudspeaker active when microphone is on: The participant's loudspeaker is active
when their microphone is on.
–
Attenuate headphone when speaking: Attenuates the headphone volume of the
Discussion Devices with 18 dB when selected and the microphone is on.
Overview camera: Sets the camera used as the overview camera.
SDI Switcher: Enter the IP address of the HD‑SDI video switcher. Do not use leading
zeros. If leading zeros are entered, the CCS 1000 D Digital Discussion System will not be
able to control the switcher.
Example:
–
Correct IP address: 192.168.10.111
Operation manual
Configuration | en
47
2020.05 | V2.2 |
Hide quick links:
Advertisement
Table of Contents
