Table of Contents
Advertisement
1. Introduction
This manual documents the unique MIRS MODE control and measurement commands used by the remote
interface to the R-2660 Communications System Analyzer. Along with publication 6%80309E55, Programming
Reference, Motorola R-2550 and R-2600 Communications System Analyzer Series (found behind the General
Operation tab in the 3-ring binder), this manual is intended to provide the information necessary to develop
application pro,- that remotely control the analyzer for use in testing MIRS equipment.
This manual includes a Command Set Quick Reference in Section 2. In Section 3, individual command and query
pages give detailed descriptions of each command (including syntax, parameters, responses, and special notes) for
the option covered in this manual.
This manual documents the control and measurement functions provided by the remote interface to the R-2660
Communications System Analyzer MIRS option. This reference is intended to be used as an addendum to the
R-2600 Programming Reference. These two documents should provide all the information necessary to develop
application programs that remotely control MJRS operation in a R-2660 unit. General usage of the R-2600
analyzer is described in the appropriate Operator's Manual, publication 68P80386B72.
The MIRS R-2600 Programming Reference details the specific commands needed for MIRS mode operation.
Refer to the R-2600 Programming Reference for general information about utilizing the remote interface of the
R-2660.
The specific commands entailed in this document overlay the set of standard commands detailed in the R-2600
Programming Reference. Many of the commands allowed in standard mode are still allowed while the R-2660 is
configured for MIRS operation. However, several of the MIRS remote commands are intended to replace the
standard command. For example, the user should not use the standard remote command to set RF-Control to
Monitor (RM). Rather, use the appropriate MIRS command to set the RF-Control to monitor (MTM or MBM
depending on the Mode).
Refer to publication 68-80309E55, Progmmming Reference Motorola R-2550 and R-2600 Communications
System Analyzer Series for the following.
Section 1
Introduction discusses configuration requirements, the layer model provided by the remote interface, and the three
modes of operation: Standard RS-232, Extended RS-232, and IEEE 488.2.
Section 2
Interface Functions discusses remote and local operations, RS-232 and IEEE 488.1 protocols, and print functions.
Section 3
Syntax Overview discusses the Talker and Listener syntax provided by the R-2600. Differences between the
syntax of the Standard RS-232 mode and the Extended RS-232 and IEEE 488.2 modes are explained.
Section 4
Status Reporting discusses the control and status data sm.tctures provided by the IEEE 488.2 model. The
capabilities of the model that are provided when operating under RS-232 control are described.
Section 5
Programming Conventions discusses optional command parameters and optional response parameters.
Section 6
Command Set Organization presents an overall description of the command set; describing command groupings
and manual entries for the commands. A quick reference to the command set is also provided.
Section 7 and on
The individual command and query pages give detailed descriptions of each command, including syntax,
parameters, responses, and special notes.
Motorola Communications Analyzer
1
MIRS Option Programming Reference
Advertisement
Table of Contents
