Conettix Ethernet Communication
Module
5.12
Factory Default page
Figure 5.8: Factory Default page
You can return the module to the factory default settings by clicking on the Factory Default
menu.
Click Cancel to cancel the factory default reset. If you select OK, all configuration options are
returned to the factory default settings.
Notice!
Returning the module to its factory default settings might cause the module to terminate the
current web browsing session. If connected to a compatible SDI2 control panel with Panel
Programming Enable enabled, the control panel overwrites the factory default settings with
the control panel's settings. To avoid the control panel settings overwriting Configuration
Page settings, set Panel Programming Enable to No after restoring the module to factory
default, but before pressing Save and Execute.
5.13
Firmware Update page
To upgrade the firmware in the module, select the Firmware Update option from the
configuration home page. The Firmware Update page opens.
Figure 5.9: Firmware Update page
Bosch Security Systems, Inc.
Installation and Operation Guide (UL)
Configuration | en
25
2013.08 | 02 | F.01U.281.208