Table of Contents
Advertisement
Available languages
Available languages
• Switch the motor on as directed
and only if your feet are a safe
distance away from the cutting
tools.
• Switch the device on with care
in accordance with these instruc-
tions. Ensure your feet are at a
suffi cient distance from the rotat-
ing blades.
The device must not be lifted or
transported while the motor is
running. Switch the device off
if it needs to be tilted for trans-
port, if surfaces other than lawn
need to be traversed, and while
the device is being brought to
and from the mowing terrain.
• Do not work with a damaged or
incomplete device or one which
has been converted without the
permission of the manufacturer.
• Do not overload your device.
Only work within the power
range indicated and do not
modify the controller settings on
the motor. Do not use low-per-
formance machines for heavy
work. Do not use the device for
purposes for which it is not in-
tended.
• Do not use the device near fl am-
mable liquids or gases. There is
a risk of fi re or explosion if this
advice is not heeded.
• Never pick up or carry away
the device when the motor is
running.
• The device must not be used at
altitudes over 2000 m.
• Never leave the device unat-
tended at the workplace when it
is ready for use.
Maintenance and storage:
• During maintenance of the cut-
ting blades, be aware of the
fact that even if the power sup-
ply is switched off, the cutting
blades can be set into motion.
• Make sure that all nuts, bolts
and screws are properly tight-
ened, and that the device is in
safe working order.
• Inspect the lawn mower for any
damage.
• Have any necessary repairs car-
ried out on damaged parts.
• Do not try to repair the device
by yourself unless you have pro-
fessional training. All work not
mentioned in these instructions
may only be performed by au-
thorised service representatives
commissioned by us.
• Store the device in a dry place
and out of reach of children.
• Handle your device with care.
Keep the tools sharpened and
clean in order to be able to
work better and safer. Follow
the maintenance instructions.
• Wear safety gloves when re-
placing the cutting equipment.
GB
MT
49
Advertisement
Chapters
Table of Contents
