Table of Contents
Advertisement
CHAPTER 1 1 Introduction
CHAPTER
5322 871 63303
96.00
Introduction
The purpose of this publication is to describe physical details of the site,
services that must be available and ambient conditions required to accomodate
the system and to allow it to produce according to the high performance it is
designed for.
It must be emphasised that the time and expense devoted to a proper survey
of the site of the system will be rewarded by a trouble-free, consistent
operation and the resulting reduction in down-time.
1.1 Responsibilities
The customer is responsible for the pre-installation. Pre-installation means all
the work that has to be done, as agreed on the basis of the check list (see
section 7), to prepare the site and to make it suitable for installation and
operation of the system.
The RSC/NSO customer support organization is responsible for pre-installation
site survey. The Supply Centre can advise on generally suitable locations.
The pre-installation site survey must be part of the negotiations before
finalizing the order.
A check list of the principal conditions is provided in section 7, which should
be completed during the site survey.
Pre-installation Manual CSM 66/84/84V III
PA 1306/40 /50 /60 /61
Introduction
Introduction
1
Advertisement
Table of Contents
