Table of Contents
Advertisement
● Code :
U1-2115
● Symptom / Cause :
The toner on printed page is not fixed perfectly. (Fuse
It is difficult to remove a jammed paper or paper tears
● Troubleshooting method :
1. Turn the machine off and turn it on again.
2. When you open and close the side door, check if th
3. Enter the diagnostic mode. Execute the fuser press
4. If the problem persists, check the following :
a Turn the machine off
a. Turn the machine off.
b. Remove the fuser unit from the machine.
c. Remove the Frame-fuser rear of the fuser unit.
d. Check the connection of the fuser pressure motor
e. Rotate the warm gear located in the left of pressu
Check if the position of pressure roller moves and
f. Check if the fuser pressure motor is defective.
5. If the problem persists, replace the fuser
a. Open the side cover.
b. Remove 2 screws.
c. Take off the fuser unit while holding both handles
d. Install the fuser unit.
d Install the fuser unit
CAUTION
The temperature gets high in the vicinity of the fuser u
replacing it, make sure that fuser unit has cooled.
Service Manual
7. Troubles
shooting
● Error message :
:
Fuser Unit Failure #
#U1-2115 : Turn off then on.
r pressure error)
easily.
ere is a sound of the fuser pressure motor.
sure motor test.
r.
ure motor.
gears related to pressure rotates.
unit(JC91-
-01142A(220V)/
s.
unit. When replacing it, you may get burned. Before
7-1
02
JC91-01141A(110V)).
[A]
SAMSUNG ELECTRONICS
Advertisement
Table of Contents
