Advertisement
2-3-25. G17 BLOCK ASSY
marking of the G17 block assy
marking of the mirror tube complete assy
2-3-26. MECHANICAL FUSE
2 eight screws (M2)
Note 2: Apply the adhesive bond to the tip of screws.
1 Align the ditch and install the mechanical fuse.
Note 1: Take care so that the flexible board and wire
are not pinched.
3 5 group tape
rear (mount) side
front (lens) side
rear (mount) side
front (lens) side
B-40
flexible board
wire
4 three tapping screws
(1.7) (CH)
3 Align the marking and install
the G17 block assy.
2 three adjustment washers
(for partial blur adjustment (Wide side))
Note: Install exactly as recorded during disassembly.
1 three G18 springs
ditch
3 5 group tape
flexible board
3 5 group tape
ditch
2-41
SELP18110G
4 Attach the front FPC assy to the
boss of the mechanical fuse.
boss
mechanical fuse
5 Attach the LF-2176 flexible board to
the boss of the mechanical fuse.
boss
Advertisement
