GS4000 Installation Guide Revision 4.00
Step 2
Remove the power cable from the power supply targeted for replacement. (See the
section 4.5.1, which gives you the instruction related to the attachment/detachment of the
GS4000-80E1 power cable.)
Power Cable
Figure 5.4-2
WARNING: WHEN REPLACING A POWER SUPPLY OR INSTALLING AN ADDITIONAL ONE,
Step 3
Loosen the screws of the power supply.
Figure 5.4-3
5-12
Power Cable Removed From the Power Supply
REMOVE THE POWER CABLE FROM THE POWER SUPPLY TO BE REPLACED.
EVEN IF THE POWER SWITCH IS TURNED OFF, ELECTRICITY IS STILL
PRESENT IN THE CABLES CONNECTED TO THE DEVICE, WHICH CAN CAUSE
A FIRE OR ELECTRIC SHOCK.
Screws
Screws to Be Removed From the Power Supply
520-10-026-30X