Table of Contents
Advertisement
WARNING: DO NOT BLOCK THE VENTILATION SLOTS. IF YOU BLOCK THE VENTILATION
Caution: When carrying or packing the device and its optional units, wear a wrist strap
!
NOTE: Place the GS4000 in a position where you can easily check the condition of the
*
520-10-026-30X
SLOTS, THE INSIDE OF THE DEVICE WILL OVERHEAT AND COULD CAUSE A
FIRE. RESERVE AT LEAST 70 MM OF SPACE FROM THE VENTILATION SLOTS
OF EACH DEVICE TO ENSURE PROPER AIR FLOW THROUGH THE VENTILATION
SLOTS.
to prevent static electricity. Without a wrist strap, the device might be damaged by
static electricity.
front panel indicators.
- Protect cables by running them through a duct or by using a braid. Especially
for optical fiber cables, a cable bend radius of at least 100 mm in length and 50 mm
in breadth is required, and they should be protected by metal braids.
- For optical fiber cables, leave a 3 m length of cable for maintenance. Wind the
rest of the cable and store it near the GS4000. If an optical fiber cable and other
types of interface cables coexist, do not stress the optical fiber cable, since it can
break.
GS4000 Installation Guide Revision 4.00
4-3
Advertisement
Table of Contents
