Toro Greensmaster eFlex 1021 Service Manual page 204
Hide thumbs
Also See for Greensmaster eFlex 1021:
- Service manual (216 pages) ,
- Operator's manual (56 pages) ,
- Installation instructions (2 pages)
Advertisement
Removing the Gearbox Assembly (continued)
Universal Groomer (Optional): Service and Repairs
g395698
1.
Eye bolt
2.
Shoulder screw (with a single-lug groomer
gearbox)
3.
Weld side of reel support plate
4.
Pry bar
5.
Reel shaft
6.
Single-lug groomer gearbox
9. Install a 5/16-18 X 5/8 inch square head set screw (Toro Part No.1-803022)
into the end of the drive shaft for the groomer drive gearbox, and tighten the
set screw to 13 N·m (120 in-lb); refer to
The square head set screw is needed to reinforce the hex end of the
drive shaft when you remove or install the gearbox. Do not apply
thread-locking compound to the square head set screw.
10. Disassemble the eye bolt of the groomer adjuster from the gearbox cover:
• Machines with a Single-Lug Groomer Gearbox: remove the shoulder
screw and hardened washer from the eye bolt and gearbox-cover lug.
Figure 122
7.
Adjuster pin (with a 2-lug groomer gearbox)
8.
2-lug groomer gearbox
9.
Cotter pin (with a 2-lug groomer gearbox)
10.
Square head set screw (Toro Part
No.1-803022)
11.
Drive shaft (groomer-drive gearbox)
12.
Hardened washer
Figure
IMPORTANT
Page 8–6
122.
Greensmaster
®
eFlex 1021
20248SL Rev C
Advertisement
Chapters
