Toro Greensmaster eFlex 1021 Service Manual page 111
Hide thumbs
Also See for Greensmaster eFlex 1021:
- Service manual (216 pages) ,
- Operator's manual (56 pages) ,
- Installation instructions (2 pages)
Advertisement
Toro Electronic Controller (TEC) (continued)
Greensmaster
®
eFlex 1021
20248SL Rev C
g338695
The diagram in
Figure 53
Two wire harness connectors attach to the controller with each of the connectors
including 12 pins. The connector pins are listed in the diagram.
The InfoCenter display should be used for checking inputs and outputs of the
controller used on your Greensmaster (refer to
The InfoCenter display can also be used to identify faults and operator advisories
that indicate operation issues with the machine.
Because of the solid state circuitry built into the controller, there is no method to
test it directly. The controller may be damaged if an attempt is made to test it
with an electrical test device (e.g., digital multimeter).
Figure 53
depicts the connection terminal functions of the TEC.
Page 5–27
Electrical System: Testing the Electrical Components
InfoCenter Display (page
5–10)).
Advertisement
Chapters
