Table of Contents
Advertisement
Item
Paper that can go through the
binder/pass-through transfer
section
Glue capacity
Trimmer waste unit capacity
Stacker capacity
Warm Up Time
Installation environment
Power
Maximum Power Consumption
Dimensions (W × D × H)*
Weight
*1 You can also adjust the width (top/bottom) in the range of ± 0.04" [± 1 mm], and length (foredge) in the range of ± 0.02" [± 0.5 mm]
by finishing size fine adjustment.
If the length defined as 1, be sure to set the ratio of width between 1.25 and 1.5.
*2 These values may differ, depending on the image data.
*3 Using the paper whose weight is 20 lb index (80 g/m
spine of the booklet because the paper has a high stiffness.
*4 Use grain short paper for covers if the paper has a paper weight that is 140 lb index (251 g/m
*5 These values are for reference purposes. They may differ from actual values.
*6 These values do not include the size of the port and the power cord on the back of the machine.
According to the printer specifications
Approximately 0.8 lb [380 g] (Enough for approximately 135
booklets when binding 100 sheets of A4 20 lb bond
2
(80g/m
) paper*
* Including the capacity of the glue container.
When binding 100 sheets of A4 20 lb bond (80g/m
cutting them to B5 size: Space for cuttings from approximately
15 booklets.*
5
Approximately 5" [127 mm] (equivalent to 10 booklets of 100
pages of 17 lb bond (64 g/m
cover of one 32 lb bond (128 g/m
1,000 sheets of paper as a total.
440 seconds max. (Temperature: 68°F (20°C), Humidity : 50% RH)
Temperature 59 to 81°F (15 to 27°C)
Humidity 20 to 80% RH (no condensation)
208V-240V AC, 50/60Hz, 3.0 A
Approximately 630 W
6
36 3/8" × 31 1/8" × 51 1/4" (922 mm × 791 mm × 1,300 mm)
Approximately 679 lb [308 kg]
2
) or higher as the body pages or the slip sheets may cause a crack in the
Specifications
5
)
2
) body pages/slip sheets and a
2
) sheet*
2
) or higher.
2
) paper and
5
) or approximately
4-3
Specifications
4
Advertisement
Table of Contents
