Canon Pro9000 Mark II Service Manual page 56

Hide thumbs Also See for Pro9000 Mark II:

Pro9000 Mark II --- 4. ADJUSTMENT / SETTINGS

4-5. Verification After Repair

(1) Standard inspection flow

In each step below, confirm that printing is performed properly and the printer operates properly without any

strange noise.

EEPROM information print

Nozzle check pattern print

Communication with a connected computer

Power-off in the service mode

External and internal appearance

Packaging

- The information must be printed properly.

<Additional verification to be made> See

At logic board replacement

At ink absorber replacement

At platen unit replacement

At feed roller replacement

- The pattern must be printed properly.

- Via USB connection to the computer, printing from the computer must be

performed properly

(paper feeding from the rear tray and from the front tray respectively).

- For repair of a specific problem, confirm the applicable specific function in

the user mode.

PictBridge, CD / DVD printing

PictBridge

CD / DVD printing

- The paper lifting plate must be in the raised position.

- No grease, oil, or smearing on the timing slit strip film.

- No lifting of the platen ink absorber.

- No foreign material or dislocation of any part inside the printer.

- No damage or scratches that will affect the functionality.

<Check point> See

5. PRINTER

- The carriage must be locked in the home position.

53 / 56

TABLE OF CONTENTS

3-1. Major Replacement

TRANSPORTATION.

Parts.