Canon Pro9000 Mark II Service Manual page 14
Hide thumbs
Also See for Pro9000 Mark II:
- Quick start manual (215 pages) ,
- Release note (4 pages) ,
- Setup instructions (2 pages)
Advertisement
CD / DVD
printing (print
continuable)
Inner cover
closed during
CD / DVD
printing (print
NOT
continuable)
7 times
Multiple ink
tanks of the
same color
installed.
Ink tank in a
wrong position.
8 times
Warning: The
ink absorber
becomes almost
full.
9 times
The connected
digital camera or
digital video
camera does not
support Camera
Direct Printing.
10 times Front tray in the
raised position
(print
continuable)
Front tray in the
lowered position
(print
Resume/Cancel button.
*1
[1855] --- Open the inner cover and press
the Resume/Cancel button to
clear the error. The CD or
DVD being printed at error
occurrence will be ejected
*1
without printing the remaining
data for the ejected CD or
DVD, then the next print job
will be performed.
[1487] U071 Replace the wrong ink tank(s)
with the correct one(s).
[1680] U072 Install the ink tank(s) in the
correct position.
[1700] --- Replace the ink absorber, and
reset its counter. [See
Special Notes on Servicing, (5)
Ink absorber counter
Pressing the Resume/Cancel
button will exit the error, and
enable printing without
replacing the ink absorber.
However, when the ink
absorber becomes full, no
further printing can be
performed unless the
applicable ink absorber is
replaced.
[2001] --- Remove the cable between the
camera and the printer.
[1281] --- Lower the front tray, and press
the Resume/Cancel button.
(The error is indicated when
the front tray is in the raised
position at the start of printing
from the rear tray.)
[1282] --- Raise the front tray, and press
the Resume/Cancel button.
(The error is indicated when
4-4.
setting.]
11 / 56
- Ink tank
- Logic board
- Absorber kit
- DSC harness
- Logic board
- Front door unit
- Front cover R unit
Advertisement
