Table of Contents
Advertisement
Basic settings
The following settings must be made
before starting up for the first time. You
can change these settings again at a
later time (see "Settings").
Risk of injury caused by hot
surfaces.
The oven gets hot during operation.
For safety reasons, the oven may
only be used when it has been fully
installed.
The oven will switch on automatically
when it is connected to the electricity
supply.
Setting the language
Select the desired language.
If you have selected the wrong
language by mistake, proceed as
described in "Settings – Language".
Setting the location
Select the required location.
Before using for the first time
Setting up Miele@home
Set up "Miele@home"
display.
To set up Miele@home now, confirm
by touching OK.
To set it up at a later date, select
and confirm with OK.
See "Settings – Miele@home" for
information on setting up at a later
date.
To set up Miele@home now, select
the desired connection method.
You will then be guided by the display
and the Miele app.
Setting the time
Set the time of day in hours and
minutes.
Confirm with OK.
Completing the commissioning
process
Follow any further instructions in the
display.
The oven is now ready for use.
will appear in the
Skip
31
Advertisement
Table of Contents
