Table of Contents
Advertisement
(5) Removing CXDI application software from the Start menu
1) Connect the keyboard and the mouse to the control PC.
2) Turn on the power for all the equipment in the CXDI system, and start up Windows NT.
3) The CXDI application is started up. Use the keyboard to enter debugging mode. (Use
[Alt] + [Tab].)
4) "Welcome to CCR" is displayed. Select "8 – Exit" to close the CXDI application.
5) Windows NT Desktop appears. Click the Start button, point to Settings, and then click
Taskbar.
6) Taskbar Properties appears. Click Start Menu Programs tab and click Remove.
7) Remove Shortcuts/Folders dialog box appears. Double-click Startup folder.
8) Click ccrstart.bat, and then click Remove.
9) Are you sure you want to sent 'Ccrstart.bat' to the Recycle Bin? appears. Click Yes.
10) Confirm the file ccrstart.bat has been removed from the Start menu. Close all the
windows and restart Windows NT.
11) After Windows NT has restarted, make sure that the CXDI application software will
not automatically start up. Then, exit CXDI application software.
* When the CXDI application is deleted from the Start menu due to repair or
other reasons, be sure to always perform the procedures outlined in "Adding
CXDI application software onto the Start menu" and "Changing the window
size" when the repair is complete.
2 Installation Manual
- 37 -
Advertisement
Chapters
Table of Contents
