Table of Contents
Advertisement
5) The sensor information is displayed. Enter the Sensor serial no. and press [Enter].
For CXDI-11/12
serial num =
CH1: BU
MSG:[LIB/DPR/TRN] DPR trn done XXXX aaaa aaaa
* The serial number entered should be "space + first 4 digits + space + last 4
digits".
For CXDI-22/31
serial num =
CH1: BU XXXX XXXX XXXX 0400 0001 XXXX XXXX
MSG:[LIB/DPR/TRN] DPR trn done XXXX aaaa aaaa
* The serial number entered should be "space + first 4 digits + space + last 4
digits".
6) The screen displays "CH1: RE SN 0000". Close the CXDI application and return to
Windows NT screen.
7) Restart CXDI application and take the step (4) Sensor serial no. check to ensure the
serial number has been changed.
8) Close HyperTerminal, exit CXDI application and shut down the system.
9) Remove the capture board interface cable.
2 Installation Manual
Sensor serial no. written is not displayed.
- 34 -
Sensor serial no. entered
Sensor serial no. entered
Sensor serial no. entered.
Advertisement
Chapters
Table of Contents
