MTS 2 and MTS 4 Installation, Configuration and Basic Service Manual
Table 4-1 Antenna Connections (Continued)
MTS RF Antenna Configuration
MTS 4
TX/RX on 2 ant.
TX on 2 ant., RX on 1 ant.
TX on 2 ant., RX on 2 ant.
TX on 2 ant., RX on 3 ant.
TX on 1 ant., RX on 1 ant.
TX on 1 ant., RX on 2 ant.
TX on 1ant., RX on 2 ant.
TX on 1 ant., RX on 3 ant.
Expansion Cabinet Connections
■
■
■
■
■
■
■
■
■
■
■
■
■
With an Expansion Cabinet, a site may be increased by up to four Base Radios per Expansion
Cabinet. The MTS 4 Expansion Cabinet can be placed on either the left side of the MTS 4 Prime
Cabinet or on the right side. Different scenarios of connecting the MTS 4 Expansion Cabinet
with the MTS 4 Prime Cabinet are described in the following sections.
6802800U74-N September 2009
In the preceding table, Low Power is valid for UHF, while High Power is valid for both UHF and
800 MHz.
The numbers illustrated are applicable for TETRA with TEDS numbers within parentheses.
■
■
■
■
■
■
■
■
■
■
■
■
■
Low Power
[W]
25
10
25
10
25
10
25
10
10
10
10
10
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Expansion Cabinet Connections
High Power
Number of BRs
[W]
40 (20)
25 (10)
40 (20)
25 (10)
40 (20)
25 (10)
40 (20)
25 (10)
25 (10)
25 (10)
25 (10)
25 (10)
■
■
■
■
■
■
1 – 2 BRs
3 – 4 BRs
1 – 2 BRs
3 – 4 BRs
1 – 2 BRs
3 – 4 BRs
1 – 2 BRs
3 – 4 BRs
1 – 4 BRs
1 – 4 BRs
1 – 4 BRs
1 – 4 BRs
4-37