Table of Contents
Advertisement
FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
●
Procedure
Step 1 On the home screen of the display module, tap Shutdown and turn off the unit
switch in the PDF.
Exercise caution because the unit is still energized after it is shut down on the
home screen of the display module.
Step 2 Open the maintenance door.
Step 3 Remove the sealing plate from the exhaust fan.
Figure 12-16 Removing the sealing plate from the exhaust fan
Step 4 Cut off the cable ties and remove the screws that secure the NTC temperature
sensor.
Step 5 Remove the interconnection terminal from the cable of the NTC temperature
sensor.
Step 6 Install the new NTC temperature sensor, reconnect the cables, and secure the NTC
temperature sensor in the original position.
Step 7 Bind the cable ties.
Issue 03 (2021-04-20)
Tool: Phillips screwdriver
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
12 Component Replacement
165
Advertisement
Table of Contents
