Table of Contents
Advertisement
chassis grounding point. If you do not have a grounding wrist strap, make sure you are
properly grounded before you touch any electronic component.
a. Loosen the four chassis tray assembly retaining screws from the front panel of the
appliance.
b. Slide the chassis tray assembly forward and pull it entirely out of the appliance.
c. Place the chassis tray assembly on a properly grounded surface.
5. Adjust the mounting brackets on the side of the appliance if necessary.
6. Mount the appliance into a standard 19-inch rack by using the mounting screws located on
the mounting brackets.
7. Slide the chassis tray assembly back into the appliance until it clicks into place, and resecure
the four chassis tray assembly retaining screws.
8. Reinstall the fan unit into the rear of the appliance.
9. Reinstall the power supplies.
IP1220 and IP1260 Security Platforms Installation Guide
All manuals and user guides at all-guides.com
Chassis tray assembly retaining screws
Before You Begin
00307a.3
00326a.2
37
Advertisement
Table of Contents
