1
Overview
Power Supply Status LEDs
The power supply status LEDs provide the status of the power supplies as described in
Table 8 Power Supply Status LEDs
LED
Fault
Over Temp
PWR OK
Fan Unit
The IP1200 Series appliance fan unit is a single unit made up of eight individual fans to provide
the air flow required to maintain a proper operating temperature. The fan unit can provide proper
airflow for a short time even if an individual fan fails.
Caution
If an individual fan fails, replace the fan unit as soon as possible. For information about
how to replace a failed fan unit, see
The system status LEDs on the front panel of the appliance show the status of the fan unit. For
more information about the system status LEDs, see
Site Requirements
Before you install an IP1200 Series appliance, ensure that your computer room or wiring closet
conforms to the environmental specifications listed in
Safety Warnings and Cautions
Warning
Hazardous radiation exposure can occur if you use controls, make performance
adjustments, or follow procedures that are not described in this document.
28
All manuals and user guides at all-guides.com
LED status
Meaning
Red
Power supply has a voltage problem and power was turned
off.
or
One power supply in a redundant system is not turned on.
Yellow
Power supply has an internal temperature problem. All
power to the unit is turned off. After the internal temperature
returns to normal, power will be turned back on.
Green
Power is on and the power supply is functioning properly.
"Installing a Fan Unit"
IP1220 and IP1260 Security Platforms Installation Guide
on page 107.
"System Status LEDs"
on page 23.
Appendix A, "Technical Specifications."
Table
8.