Table of Contents
Advertisement
Warning/error messages
When Tele-File marks cannot be recorded correctly or may not be
recorded, the following messages appear.
Warning message
"TELE-FILE NEAR FULL!"
A
This message appears when the remaining capacity of the memory label
nears about 5 % or less, but Tele-File marks are still correctly recorded.
Error messages
When Tele-File marks cannot be recorded due to mis-operation or
memory label problems.
"NO TELE-FILE!"
A cassette tape without a memory label has been loaded.
"TELE-FILE FULL!"
The memory label on the cassette tape is full.
"TELE-FILE WRITE PROTECT!"
The memory label is write-protected.
Message related to mis-operation
"INVALID OPERATION"
The message appears when you push the ASSIGN 1 switch before you
start recording. The operation is invalid.
Confirming the remaining capacity on the memory
label and clearing recorded data
For detailed information, refer to "To confirm the remaining capacity on
the memory label" and "To clear recorded data" in "Recording the
Recording Start Time Code onto the Memory Label - Tele-File"
described in the Operation Manual supplied with a camcorder.
A-12
Appendix
Advertisement
Chapters
Table of Contents
