Table of Contents
Advertisement
2
Turn the MENU knob until the FUNCTION 1 page appears, and
push the MENU knob.
The FUNCTION 1 page appears.
The current setting of an item appears to the right of that item.
A
3
Turn the MENU knob to move the t mark to ASSIGN 1, and push
the MENU knob.
The ASSIGN SW <1> window appears.
4
Assign the OK/NG/KP item to ASSIGN 1.
For detailed information on how to assign, refer to the "Assigning Functions to
ASSIGN 1/2 Switches" described in OPERATION MANUAL supplied with a
camcorder.
Recording Tele-File marks (OK/NG/KP)
Follow the procedure below to record Tele-File marks while shooting.
1
Start recording and set the unit to rec pause mode by pushing the
VTR START button or the VTR button on the lens.
2
Push the ASSIGN 1 switch and select the appropriate mark from
among OK, NG, KP or ERASE
Push the ASSIGN 1 switch several times until the appropriate marks
appears on the viewfinder.
When the display disappears from the viewfinder, the selected mark
is recorded with the recording start time and one of the following
messages appears on the viewfinder.
A-10
Appendix
Advertisement
Chapters
Table of Contents
