10 - 12
Fig. 14
Fig. 15
MOBILETT Plus and Plus M only
•
Remove the tilt bar (Fig. 14).
•
Remove the supporting wheels behind the tilt bar.
•
Jack up and block the unit securely 5 cm above the floor. This must be done properly so
that the unit does not tip over.
•
Disconnect all cables, ground connection and K68, according to (Fig. 15).
MOBILETT Plus / - E/ - M
MOB00270
Shaft
SPR8-215.898.01
Rev. 05
Mechanical systems
Locking
ring
K68
Page 12 of 28
01.02
SPS-UD
Locking ring
Siemens-Elema AB
Solna, Sweden