Siemens MOBILETT Plus Service Instructions Manual page 110
Hide thumbs
Also See for MOBILETT Plus:
- Service instructions manual (106 pages) ,
- Maintenance instructions manual (64 pages) ,
- Manual (58 pages)
Table of Contents
Advertisement
11 - 4
1
Fig. 6
•
With the wrench, adjust the tension of the transmission belt equally on the two tension
bearings to a minimum distance of 1-1.5 mm between the bearing and the washer
(Fig. 4). The tension of the transmission belt is right when the adjustment device and the
belt are in contact in exactly three points (1/Fig. 6).
In (2/Fig. 6) the belt is too tight and in (3/Fig. 6) the belt is too slack.
•
Tighten the screws (A/Fig. 4).
•
Remount the wheel.
•
Fit the covers.
MOBILETT Plus / - E/ - M
2
SPR8-215.898.01
Rev. 05
01.02
Motor drive units
3
Page 4 of 6
SPS-UD
Siemens-Elema AB
Solna, Sweden
Hide quick links:
Advertisement
Table of Contents
