Siemens MOBILETT Plus Service Instructions Manual page 105
Hide thumbs
Also See for MOBILETT Plus:
- Service instructions manual (106 pages) ,
- Maintenance instructions manual (64 pages) ,
- Manual (58 pages)
Table of Contents
Advertisement
Mechanical systems
Fig. 31
•
Install the new friction linings according to (Fig. 31 or Fig. 32). There are two different
vertical friction linings. Both are equally suitable for the unit.
•
Reinstall the upper counter bearing.
•
Tighten the screws.
•
Check that there is no braking action on the counter bearings.
•
Tighten the adjustment screw. Make sure that the spring mechanism is under tension
before releasing the ceiling support.
•
Attach the rear, left right and front covers.
•
Check parallelism, refer to section "Parallelism".
•
Adjust counterbalance, refer to section "Counterbalance".
•
Adjust friction linings, refer to section "Adjusting the friction linings".
Siemens-Elema AB
Solna, Sweden
Fig. 32
SPR8-215.898.01
Rev. 05
01.02
Page 27 of 28
MOBILETT Plus / - E/ - M
SPS-UD
10 - 27
Hide quick links:
Advertisement
Table of Contents
