Configuration Parameters; Cim / Pom Configuration Parameters - Siemens SIPLUS HCS Operating Instructions Manual
Hide thumbs
Also See for SIPLUS HCS:
- Operating instructions manual (154 pages) ,
- Compact operating instructions (20 pages)
Table of Contents
Advertisement
Planning/configuring
8.3 Device/hardware configuration in the TIA Portal
8.3.3
Configuration parameters
8.3.3.1
CIM / POM configuration parameters
The configuration parameters are directly assigned to the respective modules and are set
during device configuration. They are transferred automatically on start-up and during re-
parameterization.
CIM parameters
Description
Rated voltage for line voltage compensation
POM parameters
Description
Control mode
(Set once per POM)
Response to faults (setting per channel)
64
Value range
360 V to 520 V
•
Value range
Half-wave control (default):
•
Soft start version 1
•
Soft start version 2
•
Soft start version 3
•
Channel substitute value 0 (default)
•
Channel value retained
•
Operating Instructions, 11/2015, A5E35452705A/002
SIPLUS HCS4300
Advertisement
Table of Contents
