2. Remove the defective fuse with a suitable tool (e.g. flat-nose pliers) and insert the fuse in
the fuse holder.
Replacing a fuse
Remove the defective fuse
Re-installing the fuse board
Proceed as follows:
Steps
1
2
3
Re-commissioning the device
To do so, follow the procedure outlined in the section "Commissioning".
SIPLUS HCS4300
Operating Instructions, 11/2015, A5E35452705A/002
Place board in the guides
Push board in as far as the stop
CAUTION: During insertion, ensure that none of the components on the the soldered side of
the board are damaged.
Fix board in place again using the screws
Insert the new fuse
①
(0.5 Nm)
Service and maintenance
12.3 Fuse replacement
111