Table of Contents
Advertisement
1-1. Operating Environment
w
Avoid placing or using this unit where it will be exposed to
greasy fumes, steam, dampness and dust environments.
If placing or using this unit in these environments, it may
cause a fire and an electric shock.
• The operating temperature is 5 ˚C to 40 ˚C.
Do not install this unit near heat sources.
• To prevent a temperature rise inside the unit, pay careful
attention to circulation of air in the place where the unit
is installed.
Do not block the ventilation holes on the outer cabinet.
1-2. Power Supply
1-2-1. Power Specifications
Power requirements: 100 to 240 V AC ± 10%
50/60 Hz
Current consumption: 4.0 A maximum
(with all optional boards installed)
A switching regulator is used for the power supply of this
unit. The voltage within the range of 100 V to 240 V can
be used without changing the supply voltage.
n
As the inrush current at turn-on is the maximum 25 A, the
capacity of the AC power must be commensurate in it with
the inrush current of the maximum 25 A.
If the capacity of the AC power is not the adequately large,
the breaker of the AC power at the supply side will operate
or the unit will abnormal operate.
Section 1
Installation
1-2-2. Power Cord
w
To avoid a fire or an electric shock, be sure to use the
designated power cord.
And do not damage to the power cord.
DME-3000
Be sure to use the power cord that is supplied with DME-
3000.
DME-7000
The power cord is not supplied with DME-7000.
Be sure to use the power cord that is applicable to the
places in the world.
For the customer in the U.S.A. and Canada
Required Parts
1 Power Cord, 125 V 10 A (2.4m) : DK-2401
2 Plug Holder(Black)
For the customer in the United Kingdom
Required parts
1 Power Cord, 250 V 10 A (2.5m) : 1-590-910-11
2 Plug Holder (Grey)
n
For the customer outside of the area as shown above,
please consult with local Sony's sale/service office.
: 2-990-242-01
1
2
: 3-170-078-01
1
2
AC inlet
(Main unit)
AC inlet
(Main unit)
1-1 (E)
Advertisement
Table of Contents
