Table of Contents
Advertisement
1. GETTING STARTED
Name
AC inlet
Power supply unit
Audio port (LINE IN)
Audio port (LINE OUT)
Serial port (COM)
(9 pins: RS-232C)
RAS external contact port
(25 pins: EXT)
VGA terminal
DVI-D port
DisplayPort
PCI bus slot
PCI Express x16 bus slot
PCI Express x4 bus slot
USB ports (USB 2.0/USB 3.0)
Table 1-1 Function of each part (2/5)
This is used when connecting a power cord.
This is a power supply module with a wide-range input voltage (100 to 240 V AC).
This is the audio line input.
This is the audio line output.
You can use this connector to connect a device that uses a serial interface, such as
a modem. (See 5.8.1 Connector specifications.)
This connector is used to connect external contacts. (See 5.8.1 Connector
specifications.)
This is used to connect a cable from the analog interface of a display. (See 5.8.1
Connector specifications.)
This is used to connect a cable from the digital interface of a display. (See 5.8.1
Connector specifications.)
This is used to connect a cable from the digital interface of a display. (See 5.8.1
Connector specifications.)
This is a slot for inserting a PCI board.
The PCI Express x16 board slot can be used to insert any PCI Express x1, x2, x4,
x8, or x16 board.
This is a slot for inserting a PCI Express x4 board. Note that the connector is a PCI
Express x16 connector.
These ports are used to connect USB devices.
1-8
Function
Advertisement
Table of Contents
