Table of Contents
Advertisement
10.6.2 Starting and exiting the software RAID utility
Perform the following procedures to start and exit the software RAID utility.
(1) To start the software RAID utility:
1. Turn on the equipment and place the first disc (disc number: 1/2) of the supplied HITACHI HJ-205x-***B
Product Recovery DVD in the DVD drive before the OS starts running. (The text indicated by the underlined
asterisks (***) in the name of the DVD varies depending on the equipment you are using.)
2. After the software RAID utility runs from the recovery DVD, the following window opens.
Note:
If this utility fails to run from the recovery DVD, turn off the equipment, and then turn the equipment
on again.
3. Select the Soft RAID Utility radio button, and then click Start. The Soft RAID Utility menu window opens.
10-27
10. SOFTWARE RAID1
Advertisement
Table of Contents
