Table of Contents
Advertisement
10. SOFTWARE RAID1
10.6.8 List of error messages
This section lists the error messages displayed by the software RAID utility and the corrective actions to take for
each of them.
Table 10-3 Error messages displayed by the software RAID utility
No.
Error Message
Unreadable sector
1
was detected on
the Master.(Media
error)
(Mirrored)
Media error was
2
occurred on RAID.
Unwritable sector
3
was detected on
the
Master.Operation
aborted.
(Mirrored)
The capacity of
4
drive is not
equal.
Operation failed.
5
(EC=0xXXXXYYYYZZZZZ
ZZZ)
Operation failed.
6
(EC=0xXXXXYYYYZZZZZ
ZZZ)
Click OK button to
shut down.
Meaning
An unreadable sector was detected
on the Master (or Mirrored).
This is a media error.
An unreadable sector was detected
on both drives during the
consistency check. This is a media
error.
An unwritable sector was detected
on the Master (or Mirrored).
Operation was aborted.
The capacities of the installed
drives are different.
An internal error occurred.
XXXX: Error module
YYYY: Error processing
ZZZZZZZZ: Detailed error code
An internal error occurred (before
the Main Menu window appears).
XXXX: Error module
YYYY: Error processing
ZZZZZZZZ: Detailed error code
10-44
Remedial action
When the sector in which a read error was
detected is read, the system might not operate
correctly because information about the sector is
not rebuilt.
Back up your data and replace the drive that
contains the error, and then rebuild the RAID.
After the RAID is rebuilt, restore the backup
data.
Back up your data and replace one drive, and
then rebuild the RAID. Then, replace the other
drive and rebuild the RAID, and then restore the
backup data.
Replace the drive that contains the error, and
then rebuild the RAID.
Install drives that have the same capacity.
Contact one of our sales representatives.
Advertisement
Table of Contents
