Table of Contents
Advertisement
BKPF-106A
General
Power requirements +5 V DC: 0.43 A
−5 V DC: 0.58 A
(supplied from the PFV-D20/
D50/D100A/D200A/D300)
Power consumption approx. 5.1 W
Operating temperature
5°C to 40°C (41°F to 104°F)
Board: 194 × 310 mm (h/d)
Dimensions
3
(7
/
4
Connector panel: 194 × 75 × 25 mm
(h/d/w) (7
Mass
Board: approx. 480 g (1 lb 1 oz)
Connector panel: approx. 150 g
(5 oz)
Inputs/outputs
SDI input
SDI IN connector (BNC type) (1)
Conforms to SMPTE 259M
4:2:2 component serial
digital video signal or
4fsc NTSC composite serial
digital video signal
(selected with an internal
switch)
Input impedance 75 ohms
Input return loss
15 dB or more
(5 MHz to 270 MHz)
Transmission distance
200 m max. (when using a
Belden 8281 coaxial cable)
SDI outputs
Active-through output connector
(BNC type) (1)
SDI OUT connectors
(BNC type) (2)
Serial digital video signal of
the same format as that to the
input connector
0.8 Vp-p±10%, 75 ohms
Output return loss 15 dB or more
(5 MHz to 270 MHz)
× 12
1
/
inches)
4
× 3 × 1 inches)
3
/
4
Digital audio signal outputs
AES/EBU OUT connectors
(BNC type) (2)
48 kHz/20 bits,
AES/EBU digital audio
signal, 1 Vp-p±10%,
75 ohms, unbalanced
Output return loss 15 dB or more
(0.1 MHz to 6 MHz)
Phase difference between channels
Within the same board:
0.1° or less (when converted
to 1 kHz analog audio)
Between the boards connected
in parallel or cascade:
6° or less (when converted to
1 kHz analog audio)
Signal delay
4:2:2 SDI
approx. 0.48 µs
4fsc SDI
approx. 0.91 µs
Digital audio
approx. 450 µs (at 4:2:2 SDI)
approx. 610 µs (at 4fsc SDI)
EDH
Conforms to SMPTE RP165
ISR output information
Status messages: 6 items
Setup messages: 4 items
Design and specifications are subject to change
without notice.
15 (E)
Advertisement
Chapters
Table of Contents
