Table of Contents
Advertisement
6/88
Hägglunds DUc Drive unit | This documentation
Bosch Rexroth AB, Version 06.2020, RE 15326-WA
1.3.1 Safety messages
This documentation includes safety messages placed before sequential operating
procedures that may involve the risk of personal or property damage. The
described precautionary measures must be observed.
Safety messages are structured as shown below:
Type and source of risk
▶ Consequences if disregarded
▶ Precautionary measures
▶ <listing>
• Warning sign: draws attention to the risk
• Signal word: identifies the hazard level
• Type and source of risk: identifies the type and source of the hazard
• Consequences: describes what occurs when the safety messages are of non
compliance type
• Precautions: indicates how the hazard can be avoided
Table 2: Risk categories to ANSI Z535.6-2006
Warning sign, signal word
DANGER
WARNING
CAUTION
NOTICE
1.3.2 Symbols
The following symbols identify notices that are not safety-relevant, but enhance
the comprehensibility of the documentation.
Table 3: Meaning of the symbols
Symbol
Meaning
When this information is not observed, optimum use or operation of the product
cannot be ensured.
▶
Single, independent step
1.
Numbered instructions:
The number indicates that the different steps are to be performed successively.
2.
3.
Center of gravity
Markings on packaging to indicate where the center of gravitiy are.
SIGNAL WORD
Meaning
Indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
Indicates potential property damage: the product or the
environment may be damaged.
- Quick Links:
- Technical Data
Hide quick links:
Advertisement
Table of Contents
