Table of Contents
Advertisement
26/33
Error causes and troubleshooting
LED
Name
Video2
LED flashing
green
LED off
Link2
LED green
LED red
LED green
and red
LED off
Tab. 12-3: Description of the LED states
13 Error causes and troubleshooting
Device states are indicated at the front panel via LED.
The arrangement of the LED on the front panel is shown in
panel of the CDI+ splitter" on page
Errors
The LED V
is not on at the CDI+ splitter
IN
The active operator display cannot be
operated
No image is displayed at the active oper-
ator display
Tab. 13-1: Error causes and troubleshooting
Repairs at the device by the customer are not permitted. Exceptions
are maintenance works listed in the chapter "Maintenance".
For further information in the event of repair, please contact the
Bosch Rexroth Service.
Bosch Rexroth AG R911400465_Edition 01
Description
Image data is sent to the operator
display 2.
The PC does not sent any image data
to the CDI+ splitter
Communication active und operator
panel selected.
Operator panel not selected and no
communication possible with the op-
erator panel
Operator panel not selected, but the
communication is possible with the
operator panel
No communication possible with the
operator display, even though it is ac-
tive (selected via SEL or MOD)
12.
Troubleshooting
Connector not connected to X1S1
●
External voltage supply does not supply voltage
●
Check whether all cables are plugged in (control cabinet
●
PC, operator display and CDI+ splitter)
Check for the plug X1S1 at the input "SEL"
●
Check for the plug X1S1 at the input "MOD"
●
Check whether all cables are plugged in (control cabinet
●
PC, operator display and CDI+ splitter)
Check for the plug X1S1 at the input "SEL"
●
Check for the plug X1S1 at the input "MOD"
●
IndraControl VAC 08.1 CDI+ Splitter
Action
-
-
-
-
-
-
fig. 9-1 "Connector
Advertisement
Table of Contents
