Table of Contents
Advertisement
7. Remove the 4 screws that hold the electronic
module. Remove the electronic module.
8. Remove the air disc and the 2 screws.
9. Tap the motor housing carefully with a soft head
mallet to loosen the magnet housing. Remove the
magnet housing.
CAUTION: Make sure that the metal surface
does not become damaged.
28 - Repair and servicing
6.8.2 To assemble the stator
1. Put the motor housing onto the 4 pins of the press
tool for motor housing. Refer to
page 6 . Put the magnet housing into the motor
housing. Push the magnet housing into the motor
housing by hand.
2. Put a piece of metal on the magnet housing as
support for a mandrel press. Push the magnet
housing into the motor housing with the mandrel
press.
Servicing tools on
1332 - 001 - 04.03.2021
Advertisement
Table of Contents
