Table of Contents
Advertisement
6.6.5 To install the drill spindle
1. Push the ball bearing onto the drill spindle shaft with
a mandrel press. Refer to
2. Install the snap ring with circlip pliers.
3. Install the parallel key.
1332 - 001 - 04.03.2021
Servicing tools on page 6 .
4. Put the gear wheel into the gear housing.
5. Put the pin of the gear selector into the groove of the
gear wheel.
6. Put the drill spindle into the gear housing.
Note: Make sure that the parallel key is aligned with
the groove in the gear wheel.
Repair and servicing - 19
Advertisement
Table of Contents
