Table of Contents
Advertisement
Connect the host computer's serial port (RS-232C) to AA-3102RS's
COM 1. If the controller is not configured as redundant controller, you
may also use COM 2. Terminal emulation data through COM 1 and
COM 2 are synchronized.
Baud Rate Settings
The baud rate can be changed via the front panel. To change the
baud rate of the controller according to the host's RS-232C interface:
Press ENT for two seconds to enter the
Main Menu. Press t or s to select "View
and Edit Config Parm", then press ENT.
Select "Communication Parameters ..",
then press ENT.
Select "RS-232 Configuration ..", then
press ENT.
Select "COM1 Configuration ..", then
press ENT. (Select COM2 if you are
using COM2)
Select "Baud-rate ", then press ENT.
Press t or s to select the baud rate,
then press ENT for 2 seconds to set.
* Available baud rates are: 2400, 4800, 600, 19200 and 38400.
Chapter 11 Redundant Host, Multiple Host
View and Edit
Config Parms ×
Communication
Parameters
..
RS-232
Configuration ..
COM1
Configuration ..
Baud-rate 9600
..
Baud-rate 9600
Change to 38400?
207
Advertisement
Table of Contents
