Worksheet Entries - HP 98568A Installation Instruction
Hp 9000 series 300 computers
Hide thumbs
Also See for 98568A:
- Service information manual (142 pages) ,
- Service information manual (144 pages)
Table of Contents
Advertisement
HP 9111 A Graphics Tablet
Worksheet Entries
You have now installed your HP 9111A Graphics Tablet.
The following "Worksheet Entries" contain information needed to use your
plotter with the HP-UX operating system. Refer to the entries for the select
code you'll be using.
Copy this information to a worksheet (worksheets are found at the end of
Chapter 1, "Getting Started") or remember to refer here when you need it.
When finished, you'll be ready to install your next peripheral. If you have
installed all of your peripherals, refer to the Series 300 HP- UX System
Administration Tasks manual that came with your HP-UX operating system.
Table 8-3.
HP 9111A
Connected to Built-in HP-IB Interface (Select Code 7)
Path
File
Major
Minor *
Device Name
Name
Type
Number
Number
HP 9111A
/dev/dig9111
c
21
Ox070nOO
*
n is a number that identifies the address (set in step 3 of the Installation
Procedure). Replace n with a 6 if the address was set to 6, use 7 if the address
was set to 7, and so on.
Table 8-4.
HP9111A
Connected to HP 98624 HP-IB Interface (Select Code 8)
Path
File
Major
Minor *
Device Name
Name
Type
Number
Number
HP 9111A
/dev/dig9111
c
21
Ox080nOO
*
n is a number that identifies the address (set in step 3 of the Installation
Procedure). Replace n with a 6 if the address was set to 6, use 7 if the address
was set to 7, and so on.
Adding Plotters
&
Other
8-11
Graphics Devices
- Quick Links:
- Table of Contents
- Getting Started
- Description
Hide quick links:
Advertisement
Chapters
Table of Contents
