4/31
Using safety instructions
Description
Ambient temperature
Certification markings
Tab. 2-1: Specifications on the type plate, example
2.2 Scope of delivery
UPS
●
Safety instructions
●
Connecting cables (3 m) between the UPS and the COM interface of the pan-
●
el PC or the control cabinet PC
Connecting cables (3 m) between the UPS and the voltage supply interface of
●
the panel PC or the control cabinet PC
3 Using safety instructions
3.1 Structure of the safety instructions
The safety instructions are structured as follows:
CAUTION
Do not open the batteries and do not heat them over 80 °C.
Fig. 3-1: Structure of the safety instructions
3.2 Explaining signal words and safety alert symbol
The safety instructions in this documentation contain specific signal words
(danger, warning, caution, notice) and, if necessary, a safety alert symbol
(according to ANSI Z535.6-2006).
The signal word draws attention to the safety instruction and indicates the risk
potential.
The safety alert symbol (triangular safety reflector with exclamation marks),
preceding the signal words Danger, Warning, Caution indicates hazards for
persons.
Bosch Rexroth AG R911384727_Edition 03
Safety alert symbol
Signal word
Burns and chemical burns due to wrong
battery treatment!
Avoiding danger
IndraControl VAU 02.1 Uninterruptible
Example
T(amb) 0-45 °C (as per the temperature values of
the battery)
UL, FCC, China-RoHS,...
Consequences and
source of danger
Power Supply