Enabling Bios - Fujitsu PRIMEQUEST 2000 Series Manual
Configuring the san boot environment
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (734 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
Settings on the Fibre Channel Card (16Gbps FC Card)
3.1.6 Enabling BIOS
Enable the HBA BIOS so that the HBA can recognize the LUNs of the SAN storage unit and to enable the system to be
started from one of them.
1. Select [Set Boot from SAN <Disable>] from the [Port 001:Emulex LPe16002B-M6-F 16Gb 2-port PCIe Fibre Chann]
screen.
The screen for selecting <Disable> or <Enable> appears. Select <Enable>, and then press the [Enter] key.
C122-E206-04EN
FIGURE 3.9 [Set Boot from SAN] (Enabling boot (1))
66
Advertisement
Table of Contents
